WyreStorm launches the EX-1UTP-IR-100-EDID and EX-1UTP-IR-100-POE, a pair of HDBaseT extenders able to transmit HD (one can do up to 4K resolution), audio and video, ethernet, control and power over up to 100m of Cat5e/6 cable.

The extenders provide a more stable, easier-to-install alternative over long HDMI cable runs with the benefit of 2-way IR, RS-232 control, 10/100 ethernet pass through via single cable and support for multi-channel DTS-HD Master Audio and Dolby Digital True HD.

To alleviate handshaking issues both models feature forcible EDID settings via dipswitch, allowing installers to either copy EDID from display to receiver or force 1080p 3D, 1080p Stereo, 1080i Stereo or 1080p 5.1 Multi-Channel EDID.

Each model also features HDMI pass through on the transmitting end to connect an additional display near the source.

According to WyreStorm the EX-1UTP-IR-100-POE allows uncompressed transmission of 36-bit 1080p video together with PoE. The  EX-1UTP-IR-100-EDID requires a 5V power supply at both transmission and receiver ends, but adds uncompressed 4K/UHD video support.

Go WyreStorm

DVDO launches the Quick6-- a 4K (aka Ultra HD/UHD) HDMI Switcher complete with InstaPrevue and MHL technologies, as well as all latest video functionalities.

It carries x6 300MHz HDMI inputs and x2 outputs (as well as S/PDIF optical and coax outputs) making it ideal for integration with existing A/V Receivers (AVR), upgrading and future-proofing (with 4K support) your customers' home theatres.

A pair of MHL inputs allow connection to MHL-enabled mobile devices, while InstaPreview provides live on-screen previews from active inputs.

Further features include InstaPort S Technology (allows near-instantaneous input switching), picture-in-picture, Audio Return Channel (ARC), automatic switching and a USB port for easy firmware updates.

Go DVDO Quick6

SnapAV ships the first Binary HDBaseT products-- the B-500-EXT-230-RS and B-500-EXT-330-RS extenders, both able to transmit HD video, audio, and bi-directional IR and RS-232 control signals via single Cat5e/6 cable.

The B-500-EXT-230-RS transmits signals for up to 70m, while the B-500-EXT-330-RS has a transmission range of up to 100m with additional ethernet pass-through.

Both extenders support 4K and 3D video support with PoE (eliminating external power supplies at receiver end) and carry built-in ESD and surge protection.

Installation requires no EDID or EQ settings, making it what SnapAV describes as "a true plug-and-play experience."

Go SnapAV B-500-EXT-230-RS

Go SnapAV B-500-EXT-330-RS

AVFoundry starts shipping the VideoForge-- a portable test pattern generator installers can use either independently or incorporate with Spectracal CalMAN software.

It provides an HDMI output and the video signals needed for the testing, calibration and servicing of HD displays (including 3D displays) with 3 distinct control interfaces.

First the VideoForge uses an XML-RPC control interface for automated control. Second it features an Adobe Flash-based control panel for interactive control. Finally one can control the VideoForge with programmable IR remote for standalone operations.

Every test pattern can be displayed in a 3D video format, with patterns showing the same image in both left/right eye frames and true stereo patterns available from JPG and PNG files on SD card.

Meanwhile independent on/off left and right eye image gating allows for stereo separation or left/right crosstalk testing and measurement.

Go AVFoundry VideoForge HDMI

Australian supplier of structured cabling, RF and video distribution and IR control solutions, resi-linx, enters the EMEA markets with the launch of its digital digi-MOD HD DVB-T/DVB-C encoder modulation system.

The digi-MOD HD digital DVB-T/DVB-C encoder modulation system allows integrators to distribute HD content from any HD device around a home or business.

Initially available in two models – the HD-1000 (single input) and HD-2000 (dual input) – the digi-MOD HD system converts HD sources into HD DVB-T/DVB-C channels for distribution over coaxial cable. Coming in April 2013 are the HD-4000 (four input) and HD-8000 (eight input) models, and the IP encoder range.

All models support signals up to 1080p and ‘auto-sense’ inputs between HDMI, Component and CVBS.

Kramer launches the VS-808TP-- a high performance 8x8 twisted pair matrix switcher for analog twisted pair signals.

It features 8 inputs and 8 inputs for remote connection with the TP-133/TP-134 transmitter/receiver pair. Switchable VGA, stereo audio and RS232 local input (built-in transmitter) and output (built-in receiver) allow direct connection of signals (analog video up to WUXGA, audio and RS232) with compatible units.

A 2-line LCD display shows separate routing information of video, audio or RS232 signals. Control comes through front panel buttons, RS232, RS485 and ethernet.

The package is standard 1U rack mount size and ships complete with rack ears.

Go Kramer Introduces VS-808TP Twisted Pair Matrix Switcher