Gefen launches the 1:4 Dual Link DVI Splitter-- offering plug and play signal distribution of x1 dual link DVI source to x4 dual link outputs, with no quality or resolution loss.

It works with any dual link DVI PC, supports resolutions up to 3840x2400 and includes internal or pass-through EDID (improving connectivity) and optional output masking control via RS-232 port.

A standby mode keeps the unit idle, using only 1W of power when source is inactive.

It is rack mountable and includes a locking power supply, which Gefen says improves installation robustness and performance.

Go Gefen 1:4 Dual Link DVI Splitter

The new TLS Converter & Scaler AD/D converts analogue input signals into digital signals and allows for connecting DVI devices such as projectors, TFTs and LCDs to analogue sources such as the VGA output of a graphics card.

The 118 x 42 x 148 mm aluminum TLS Converter & Scaler AD/D with remote control is equipped with an automatic recognition of all common VGA resolutions up to 1920x1200 and allows for scaling the input signals (also DVI) to a selectable format (e.g., to the native resolution of the output device).

Inputs include DVI-I female and Mini USB. Output is DVI-D female. The external power supply is 100-240 VAC; 50-60 Hz / 5 VDC; 3 A. Weighs 450 gm.

Go TLS Converter & Scaler AD/D

BMB Electronics announces the availability of Planet Waves universal connectors in Europe-- new RCA, BNC and F connectors eliminating the need stripping and crimping tools for the termination of coax cables.

The connectors fit with standard RG6, RG6 Quad and RG59 coax cables, and have a magnetic tip (holding screws in place), soft grip, an ergonomic shape and a swivel head spinning in the palm of your hand.

Installers need to first cut and remove the coaxial jacket, shield and insulator with the Planet Waves one step strip tool-- leaving the copper conductor exposed in the correct length before inserting it into the connector.

The final step involves tightening the patented screw cutting the jacket while holding the connector securely in place.

Planet Waves says the connection is fully tested for "superior 75 ohm signal transfer," offering speed, efficiency and quality in one connection.

Go Save Time with Planet Waves!

Crestron launches 2 universally compatible backboxes-- the BBI-UNIV-A and BBI-UNIV-B, suiting a variety of devices, including Crestron touchscreens, in-wall iPad docks and Excite 5.25" and 6.5" in-wall speakers.

The backboxes are ideal for multi-purpose and multi-regional use, coming in 2 sizes working with a wide selection of Crestron devices. The company says the housing design "ensures a stable and secure fixing."

Installation requires a suitable wall aperture or opening. Once cables are fed through with the conduit, installers should fasten the housing into the wall before ither clamping equipment (touchscreen, Excite speaker, iPad dock) or securing via screws into the mineral fibreboard.

Go Crestron